Selection of Appropriate CABLE COVER:
The correct cable cover for your particular requirement can be selected very simply by ascertaining the outer dimensions of the cable/s to be covered and then matching to the profile with the most appropriate bore size/s. Should you require any further advice or guidance please call us. (Other colours or lengths can be produced to order.)
Installation of Osmor Cable Cover:
Fitting cable cover could not be easier. Simply unroll, cut to desired length, insert cables or leads to be covered and then lay the Cable Cover on the floor in the position required. If your cables already have fittings attached then the base of the Cable Cover can be slit with a sharp knife. (You must ensure there are no cables within the Cable Cover before slitting the base). We recommend the use of double sided adhesive tape when installing cable cover on interior floors and coverings.